Aprivate group has taken one small step toward the prospect of building afuturistic space elevator.
LiftPort Group Inc., of Bremerton, Washington, hassuccessfully tested a robot climber - a novel piece of hardware that reeleditself up and down a lengthy ribbon dangling from a high-altitude balloon.
Thespace elevator would be anchored to an offshore sea platform near the equatorin the Pacific Ocean. At the other end in space, the ribbon would be attachedto a small counterweight. Mechanical "lifters" -- robotic elevator cars --would move up and down the ribbon, carrying such items as satellites, solarpower systems, and eventually people into space.
LiftPort's plan is to take the concept from theresearch laboratory to commercial development.
"Wewere very pleased with the test," said Michael Laine,President of the LiftPort Group. "It worked reallywell," he told SPACE.com.
Theassessment of flight hardware took place September 20 at an undisclosedlocation in eastern Washington. Due to the experimental nature of theequipment, actual whereabouts of the test site can't be revealed, primarily dueto safety reasons, Laine said.
"Ifour 23-pound (10.5-kilogram) robot falls from the ribbon...we don't wantspectators to be in the way as it makes a couple thousand dollar crater," Laine explained.
Thisweek's testing involved a 12-foot (4-meter) diameter balloon. Safety lines heldby team members kept the balloon from floating away. The ribbon dangling fromthe balloon was made of composite fiberglass, with the robot lifter running upand down the tether.
"Thislifter is much smarter than our previous versions. It's our 18th version," hesaid, with the Mark VII robot named 'Sword over Damocles' or 'sword' for short.The "belt driven" robot is battery-powered, featuring two motors and anexpanded cargo area due to increased intelligence built into the device, hesaid.
Duringthe day, the highest altitude reached by the balloon/ribbon/robot combinationwas 1,000 feet (305 meters). "It gives us complete confidence that the milegoal is well within reach," Laine said.
"Weare cleared up to one mile high, off of a tethered helium balloon," Laine said. "Our series of tests are designed to gain inaltitude as we go, as we test our communications, range sensors, globalpositioning system satellite gear, along with temperature and camerasystems."
"Wehave a fairly open window to do more tests," Lainesaid. "We've probably got another month or so if we're going to do it here inWashington State."
"Butthe test was a step in the right direction," Lainesaid. "It shows that our hardware design is valid."
Furthermore,the company has created LiftPort Nanotech inMillville, New Jersey. That company is delving into mass production of nanotubes, focused on creating super-strong materials,"because, ultimately, that's what leads to a long and strong ribbon in thesky," Laine said.
"We'renot a PowerPoint company anymore...we're a hardware company," Laineconcluded.
Ina related development, the Spaceward Foundation of Mountain View, Californiahas announced the First Annual Space Elevator Competition, to be held October21 at NASA's Ames Research Center in Silicon Valley.
Twocompetitions are being held: The "Tether Challenge" and "Beam Power Challenge".These are two of the key technologies required to build a space elevator.
- Elevator Man: Bradley Edwards Reaches for the Heights
- NASA Details Cash Prizes for Space Privatization
- Space Elevator: Momentum Building
Join our Space Forums to keep talking space on the latest missions, night sky and more! And if you have a news tip, correction or comment, let us know at: community@space.com.
